At Infinite Water we understand our community’s desire to understand more about water quality. In the water treatment industry, terms like total dissolved solids can be mentioned by water technicians, but they aren’t always explained thoroughly. It may have left you wondering, “what is tds in water?”.

Total Dissolved Solids (TDS) in water are usually the minerals, salts, and metals dissolved in it. Knowing the TDS helps us understand the water composition at any one location. In this article, we’ll explain what TDS in water is, its sources, and how to measure and manage it.

What Are Total Dissolved Solids (TDS)?

Total Dissolved Solids (TDS) is a collective term used for both organic and inorganic substances that exist as dissolved particles within water. These elements, separate from the actual H2O molecules, act as indicators of the water’s composition and its overall quality. The process of measuring total dissolved solids serves as an essential gauge for determining whether or not water is safe to drink.

Total dissolved solids is generally composed of a mix of compounds such as inorganic salts—which can include calcium, magnesium, and sodium—and small amounts of organic matter derived from plants and animals that influence several aspects like taste, smell, and purity. Being aware of what makes up TDS provides valuable information necessary for making informed decisions concerning how we use and treat our water.

Depending on where it originates – be it well water or tap water supplied by a municipally – TDS content can vary greatly. Organic material along with various inorganic components play roles daily affecting the condition of our drinking supplies, which is why understanding total dissolved solids (TDS) is so important for managing our water resources effectively.

Common Components of TDS

Assessing the TDS in water uncovers various components such as minerals, salts, and metals. This includes elements that are beneficial for health like calcium, magnesium, potassium, and sodium. It can also include hazardous substances like lead and arsenic. According to the National Institutes of Health, water with unusually high TDS levels generally signals contamination from human activities. This can include soil and agricultural runoff caused by irrigation, unregulated animal grazing, impacts from wildlife, environmentally harmful farming practices such as slash-and-burn agriculture, and the excessive use of nitrate-based fertilizers, among other factors.

The identification of these components is critical for evaluating the quality of water and deciding on suitable treatment methods.

Certain dissolved solids can contribute positively to our health by providing necessary nutrients. Nevertheless, some can pose risks when their concentrations become excessive. Elements such as dissolved calcium and magnesium are vital for various bodily functions, but they also influence the hardness level in water—which has its pros and cons depending on context, which we’ll discuss below. Understanding this balance is key to effective water quality management. A local water treatment professional will have in-depth knowledge and can provide expert advice on maintaining optimal TDS levels.

Sources of TDS

The presence of TDS in water can be caused by both natural and human-related factors. Lakes, rivers, and springs naturally contribute dissolved minerals along with organic matter from vegetation and earth to create foundational levels of organic salts and other minerals.

Conversely, the impact humans have on TDS concentrations is notable. The introduction of a substantial amount of dissolved solids into aquatic systems can stem from agricultural runoff, industrial emissions, as well as urban drainage. Materials utilized during water treatment processes may also elevate the total amount of TDS present in water sources—highlighting the necessity for efficient filtration strategies and careful management of our water resources.

Measuring TDS in Drinking Water

Ensuring the quality of drinking water is essential, and utilizing a TDS meter provides an efficient method to evaluate TDS levels with precision. The concentration of dissolved substances in the water is indicated by measurements given in milligrams per liter (mg/L) or parts per million (ppm).

By gauging the electrical conductivity within tap water, these meters can infer the quantity of dissolved ions present. This powerful instrument can greatly aid in understanding and maintaining your drinking water’s quality. However, it’s important to rely on a water treatment expert who can use a quality test kit to get accurate results and interpret them correctly, ensuring you receive the best information about your water quality.

How Does a TDS Meter Work

Utilizing a TDS meter is a process best handled by a professional. The sensor is immersed in a sample of water, and within moments, the device will display the level of Total Dissolved Solids (TDS) measured either in parts per million (ppm) or milligrams per liter (mg/L). This assessment is crucial for understanding basic water quality, ensuring that appropriate measures can be taken if elevated levels are detected.

By relying on a professional to use a TDS meter for testing, you stay informed about the specific levels of dissolved solids in your water supply. This tool serves as an efficient method to oversee and uphold safe potable water standards for yourself and others who consume it. Testing TDS levels through professional services allows for quick identification of potential issues, ensuring safer drinking water.

Understanding TDS Levels

Understanding the levels of Total Dissolved Solids (TDS) is critical for evaluating water quality. When TDS readings fall below 300 parts per million, it typically means that there are low concentrations of dissolved ions. According to the World Health Organization (WHO), water with TDS levels below 300 ppm is generally considered excellent for drinking. Up to 500 is considered good or acceptable. Anything above that should be evaluated further. Drinking water becomes significantly and increasingly unpalatable at TDS levels greater than about 1000 mg/l, and needs immediate and further investigation.

According to the World Health Organization, highly elevated TDS levels could point to potential contamination issues requiring more sophisticated treatment options. Recognizing the thresholds above and working with a professional like Infinite Water can help homeowners make informed decisions regarding appropriate water treatment methods while maintaining a high standard of drinking water quality for their families.

Why Measure TDS in Water?

It is essential to measure the TDS levels in water. It plays a vital role in ensuring the taste and safety of drinking water and helps homeowners protect plumbing systems and appliances from potential damage. High TDS readings can also be a sign that there are potentially harmful substances within the water that could pose health hazards. That’s why a water quality test is so important.

Impact on Taste and Smell

Elevated TDS levels can greatly alter both the flavor and odor of drinking water. Water characterized by high TDS typically possesses an unpleasant taste.

Drinking water can acquire a bitter flavor when the TDS levels are elevated, whereas a low TDS concentration might lead to water tasting flat. While this is generally an issue that affects enjoyment rather than safety, it has significant implications for how satisfied you can feel about your drinking water.

It’s important to recognize that the impact of TDS goes beyond just altering taste. It also can change the scent of the water. When there’s a high level of TDS present, it may result in unpleasant odors.

By addressing and managing the levels of TDS, you can control and improve your experience with the drinking water in your home.

Health Implications

Many people only associate elevated TDS levels with hard water, which research has so far shown is not hazardous to health.

While this is often true, high TDS levels can also signal the presence of various dissolved substances, it’s important to note that TDS levels alone are not directly harmful. The potential health risks are primarily associated with specific contaminants that may be present within the dissolved solids. For example, substances such as arsenic, lead, and aluminum can pose significant health risks if consumed over long periods.

The Environmental Protection Agency recommends that total dissolved solids not exceed 500 mg/L, but since TDS only falls under National Secondary Drinking Water Regulations, that level is not enforceable by law. It is merely a recommendation for municipalities. Making it even more important for you to have your water tested by a professional. When levels start to exceed this amount, it is a potential indicator that more than minerals are present.

It should be noted that certain minerals found within these dissolved solids—namely calcium and magnesium—are beneficial for our well-being in certain amounts. To compensate for their removal during certain filtration processes, some systems incorporate remineralization filters designed specifically to replenish these vital nutrients back into drinking water.

Effects on Plumbing and Appliances

Elevated TDS levels can negatively impact household plumbing and appliances in several ways. The minerals can form scale in water heaters, boilers, and pipes, leading to buildup and drainage issues, which restrict water flow and eventually clog the plumbing. This can also often lead to more frequent maintenance of appliances due to excessive mineral deposits, reducing the lifespan and effectiveness of fixtures and appliances. Consequently, homeowners may face expensive and premature replacement costs.

Understanding how high TDS affects your home’s plumbing, fixtures, and appliances is crucial. High TDS levels usually indicate hard water, which contains a lot of minerals like calcium and magnesium. While these minerals are not harmful to human health, they can cause significant problems for your pipes and water-using appliances, and can even affect your laundry and skin. You can read more about signs of hard water here.

Reducing Total Dissolved Solids in Your Water

Ensuring that the total dissolved solids in your water are within acceptable ranges contributes to the overall water quality for both everyday use and drinking. Some of the most effective methods for achieving this include reverse osmosis, distillation, and ion exchange. These vary based on the specific composition of your water, location, water usage, household size, and budget.

It’s important to choose a filtration system that aligns with the particular impurities found within your source of water as well as your personal preferences. By recognizing each method’s effectiveness and constraints, you can determine which filtration approach meets your specific needs.

Reverse Osmosis Systems

Reverse osmosis (RO) technology is highly effective in drastically reducing total dissolved solids by pushing tap water through a semipermeable membrane that acts as a barrier to impurities. These systems are proficient at extracting various contaminants, including lead, copper, bacteria, viruses, and PFAS from the water supply. According to the WQA the amount of pressure required for an RO unit depends on the total dissolved solids in the the water supply. A professional should ensure that the system is installed, functioning, and maintained properly.

RO significantly reduces contaminants from tap water to provide you with cleaner, safer drinking water. An RO system can often remove too many of the beneficial minerals in drinking water as well. That’s another reason a professional should install your system. They can ensure that these minerals are reintroduced to your drinking water if that is something you prefer.

Utilizing an RO system is recommended when dealing with questionable or possibly tainted water sources. Beyond safety measures for cleaner drinking water, they also enhance taste quality, making drinking water more enjoyable.

Water Distillation

Distillation of water serves to greatly reduce total dissolved solids by simulating the natural evaporation process. It heats the water until it steams and then condenses that steam back into a purified state, effectively separating any impurities from the liquid.

The technique is popular for its ability to significantly reduce dissolved solids. However, it is important to note that distillation demands significant energy input and can be less efficient at removing certain volatile organic compounds or contaminants with a lower boiling point than water.

Ion Exchange

The Ion Exchange process is highly effective at reducing total dissolved solids in water by reducing dissolved ions. It actively lowers TDS by exchanging unwanted charged particles with other ions using ion-exchange resins, thereby yielding cleaner water.

Depending on the composition of the total dissolved solids, different types of ion exchange can be employed. For example, cation exchange resins can be used to remove positively charged ions like calcium and magnesium for treating hard water, while anion exchange resins are effective for negatively charged ions such as chloride and sulfate. This adaptability makes ion exchange a versatile method for water purification. Multiple methods may need to be employed together, often called a treatment train, to ensure that total dissolved solid levels are within optimal ranges.

For a more detailed understanding of ion exchange processes and their applications, you can refer to the Ion Exchange Fact Sheet published by the Water Quality Association.

Regulatory Standards for Total Dissolved Solids

In the United States, the Environmental Protection Agency (EPA) classifies Total Dissolved Solids as a secondary standard, providing a voluntary guideline rather than a mandatory regulation. While primary standards enforce limits on contaminants that pose significant health risks, secondary standards like total dissolved solids address aesthetic and technical concerns, such as taste, odor, and potential scaling in pipes.

The EPA recommends a TDS level of 500 parts per million (ppm) or less for drinking water. Although a moderate TDS itself is not harmful, high levels can indicate the presence of other contaminants like iron, manganese, sulfate, bromide, and arsenic, which are regulated.

Working with a Professional

Understanding Total Dissolved Solids is key to ensuring your water quality and overall health. High TDS levels usually affect taste, smell, and the lifespan of your plumbing and appliances, but excessively high levels can indicate the presence of potentially hazardous contaminants.

A local water treatment expert can provide valuable insight into managing these levels effectively and offer solutions tailored to your specific needs.

At Infinite Water, we specialize in water testing and treatment to help you maintain optimal water quality. Our experienced team can analyze your water and recommend the best solutions for your family based on your quality of water, preferences, water usage, and budget.

Don’t let issues with your water linger. Call Infinite Water at (306) 994-6133 or contact us here for a free water consultation and take the first step toward cleaner, safer water for your home.